Automatic Demonstration; Provided Accessories; Sxm27Ea/Sx22Ea Only) - JVC GR-SXM470A Instructions Manual

4
EN
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
Available when the Power Switch is set to "
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
"DEMO MODE" remains "ON" even if the camcorder power is turned
off.
To cancel Automatic Demonstration, set the Power Switch to "
press MENU while the demo is in progress. This takes you directly to the
demo mode's Setting Menu (so you will not have to go through the main
Menu Screen). Rotate MENU to select "OFF" and press it.
NOTE:
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• Battery Pack
BN-V11U
• Lens Cap
• AAA (R03) Battery x 2
(for Remote Control Unit,
GR-SXM470A only)
• AA (R6) Battery
(for Cassette Adapter,
GR-SXM470A/FXM270A/
FXM170A/FX220A/FX120A/

SXM27EA/SX22EA only)

AUTOMATIC DEMONSTRATION

PROVIDED ACCESSORIES

• Remote Control
Unit RM-V716U
(GR-SXM470A only)
• A/V (Audio/Video)
Cable
• Power Cord
• Shoulder Strap
" or " ".
" and
• Cassette Adapter C-P7U
(GR-SXM470A/FXM270A/
FXM170A/FX220A/FX120A/
SXM27EA/SX22EA only)
• S-Video Cable
(GR-SXM470A/
SXM27EA/SX22EA
only)
• Core Filter x 3
(for provided A/V Cable and AC Adapter,
GR-FXM270A/FXM170A/FXM17A/
FX220A/FX120A/FX12A only)
• Core Filter x 4
(for provided A/V Cable, S-Video Cable
and AC Adapter, GR-SXM470A/
SXM27EA/SX22EA only)
DEMO MODE
O F F
O N
E X I T
Setting Menu
• AC Adapter
AP-V10A, AP-V10AS
or AP-V10EA
• Editing Cable
(ø3.5 mini-plug cable)
(GR-SXM470A only)