Download Print this page

Advertisement

Quick Links

Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
Fast & powerful crease removal
- Soleplate: SteamGlide
- OptimalTemp
- Continiuous steam output: 120 g/min
- Steam boost: 230 g/min
- Vertical steam
- Steam pressure: Up to 5 bar
- Steam tip
- Power: 2400 W
Easy to use
- Water tank capacity: 1500 ml
- Filling and emptying water: Detachable water tank
Extra large opening door
- Refill any time
- Heat-up time: 2 min
- Hose storage: Hose storage compartment
- Cord storage: Cord storage compartment
- Power cord lenght: 1.8 m
- Cord freedom (swivel): 180 degree cord freedom
- Hose length: 1.7 m
- Safe for all fabrics: Even for delicates like silks
Calc management
- Suitable for tap water
- Calc clean solution: Easy De-calc
- Calc clean reminder
Published by Philips Consumer Lifestyle
12/08
EMF & Service Information
- This product meets the requirements regarding interference
suppression on radio & TV.
- After the product has been repaired, it should function
properly & has to meet the safety requirements as officially
laid down at this moment.
TECHNICAL INFORMATION
Voltage
Frequency
Power
Dimension (F-box) : 491 mm x 305 mm x 335 mm
Weight
Optimal Temp technology
- Delivers always perfect combination of steam and temperature
- 100% easy to use, no adjustment required
- 100% safe on all ironable garments
- 100% effective on all fabrics, no other iron is faster
- Tested and approved by independent textile experts
Easy De-calc
Easy De-calc cap allows hassle free & effective scale removal
to extend the life of the steam generator.
Printed in the Netherlands
Steam Generator
: 220 - 240 V
: 50 - 60 Hz
- Iron
: 800 W at 230 V
- Boiler
: 1370 W at 230 V
(Depth x Width x Height)
: Weight of iron: 1.2 kg
Weight of iron + base: 5 kg
1
Always the perfect setting thanks to:
1 - Cylonic steam chamber
2 - Advanced Smart control processor
2
© Copyright reserved
GC922
Subject to modification

Advertisement

loading

Summary of Contents for Philips GC922

  • Page 1 - Calc clean solution: Easy De-calc Easy De-calc cap allows hassle free & effective scale removal - Calc clean reminder to extend the life of the steam generator. Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification...
  • Page 2 GC922 DISASSEMBLY ADVICE - IRON BACKPLATE ASSY 16 SOS KNOB 13 INLAY MOLDED 17 MICRO-SWITCH ASSY 12 HOSE CORD MOUNTED ASSY SOS 15 HOUSING & LENS ASSY PRINTED 9 LIGHT GUIDE ASSY 10 COVER MOLDED SOS 8 DEVIATOR ASSY 3...
  • Page 3 PARTS LIST - IRON GC922 Service code Description 4239 021 78131 Soleplate mounted assy 230 V / 800 W 4239 021 61471 Thermistor assy Iron 4239 021 61523 Deviator assy 4239 015 59151 Braided rubber hose iron 4239 010 11991 Hose clip (ID=8.7)
  • Page 4 GC922 EXPLODED VIEW - IRON Micro Switch holder Cord clamp Rubber gasket 4-12...
  • Page 5 GC922 DISASSEMBLY ADVICE - STAND WATER TANK PRINTED ASSY 58 TRAY MOLDED 53 DISPLAY COVER PRINTED ASSY 50 STAND TOP MOLDED 45 POWER CORD STORAGE MOLDED 42 HOSE CORD STORAGE COMPARTMENT ASSY 43 RINSE CAP ASSY 56 RINSE HOUSING PRINTED 39...
  • Page 6 GC922 PARTS LIST - STAND Service code Description 4239 021 61591 Stand bottom assy 4239 021 61602 Pump assy 4239 026 42081 De-air valve 4239 015 59201 Braided rubber hose boiler 4239 010 10261 Inox clamp 4239 026 32181 Spacer Bottom molded...
  • Page 7 GC922 EXPLODED VIEW - STAND Cord clamp O-ring 7-12...
  • Page 8: Electrical Block Diagram

    ELECTRICAL BLOCK DIAGRAM GC922 Thermistor Stand Electronics UI Board Trigger Switch Power Board Iron Thermal Fuse Hall Sensor Thermistor Board Iron Thermal Heating Fuse Element Pump Steam Boiler Heating E-valve Element STAND IRON 8-12...
  • Page 9: Wiring Diagram

    WIRING DIAGRAM GC922 THERMAL PUMP FUSE (L) WA19 : HE-Fuse (L) M #1 THERM-BOILER THERMAL FUSE (N) WA20 : HE-Fuse (N) BOARD EVALVE-EARTH 9007 HALL SENSOR 9012 BOARD POWER BOARD (3.96 mm) 9017 9018 (Iron LED) 9004 (Iron Live) HOSCORD...
  • Page 10: Repair Instructions

    REPAIR INSTRUCTIONS GC922 - Due to the high wattage of the iron, only the specified cord set must be used. - Should damage be observed on the HOSE CORD MOUNTED ASSY 15 or CORD SET 44, they must be replaced.
  • Page 11 REPAIR INSTRUCTIONS GC922 5. Crimping INOX CLAMP 34 When exchanging BOILER ASSY 36 or DE-AIR VALVE 32 or BRAIDED RUBBER HOSE BOILER 33, it is necessary to replace the INOX CLAMP 34. Below instructions ensure that the inox clamp is crimped correctly.
  • Page 12 REPAIR INSTRUCTIONS GC922 6. Replacing ELECTROVALVE 37 To prevent damage to the electrovalve during service activity, please observe below precautions during disassembly & reassembly. Tools required: Torque wrench (set to 6 kgf) CAUTION #1: The torque wrench engagement is allowed ONLY at the yellow box locations in below picture.

This manual is also suitable for:

Gc922/02