Advertisement
28/03/2022 19:02
Phone setup with system software version below version 9.xx:
Important: The "Force Headset" function must not be activated on the
phone, as otherwise it will not be possible to accept external calls.
Menu> Settings> Phone> Audio Jack> Force Headset OFF
Menu> Settings> Phone> Socket > Activate Headset
Dial tone transfer / phone setup:
Important: The dial tone signal in the headset is only transmitted if one of
the following ringtones is used, e.g. Standard / Classic / Cold River /
Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External
Should the dial tone signal transfer not work although you have set up the
correct ringtone, please check the following settings:
Menu > Settings > Phone > Internal/External, More Options
No sound, Progressive, Beeps> all points must be set to "OFF".
Calls being made via the headset can be connected / forwarded as follows:
Dial the phone number > "Forward" will now appear in the phone display >
now press on to the appropriate function key next to the phone display >
now you should end the call with the button marked "Handset"
/supportpages/jabra-link-14201-09/14201-09/faq/327aff69-482c-4c14-9c69-
Page 4 of 4
a05acacc15d7
Advertisement
