Page 1
FOREST TRAILER OPERATION, MAINTENANCE AND SPARE PARTS MANUAL PLEASE READ THE OPERATING AND MAINTENANCE INSTRUCTIONS BEFORE YOU OPERATE THE MACHINE. S T A N D A R D P R O F I FROM MACHINE: YH5FT009JB000087 TRANSLATION OF THE INSTRUCTION MANUAL C-EN-301219-ER...
54839950 HUB, WITH BRAKES, 6-BOLTS, LEFT, RINNER 200002596 TYRE SET 400/60-15.5 200002597 TYRE SET 500/50-17 PRODUCT REGISTRATION FORM When ordering spare parts, please indicate machines type from the machine plate, spare parts order num- ber, description and quantity required. Example. FT9, 44081760, pin, 1 pc...
Page 4
EC DECLARATION OF CONFORMITY Original declaration of conformity Manufacturer: Farmi Forest Corporation Ahmolantie 6, FIN-74510 IISALMI, Finland Person authorized to compile the technical documentation: Name: Petri Pelkonen Address: Ahmolantie 6, FIN-74510 IISALMI, Finland Commercial name: Farmi Machine denomination: Forest trailer...
INTRODUCTION This manual includes the information and maintenance instructions required for operating the machine in the optimal manner. Although you have experience in using this kind of machinery, read the operation and maintenance instructions careful- ly since they include information enabling efficient and safe operation. Regular maintenance is the best way to guarantee the efficient and economical performance of the machine.
GENERAL DESCRIPTION AND INTENDED USE OF THE TRAILER FT9 is a forest trailer with repositionable bolsters and bogie to allow a stable load for different timber lenghts. A variety of hydraulic and pneumatic brakes are available. The standard drawbar steering provides improved ma- nouverability.
LED rear light series , (order no 200003231) Operator stand (order no 200000381) • Operator and control valve platform to be mounted on the trailer drawbar Frame extension (FT9 order no 200003157, FT10 order no 200003160) • Metre-long extension provides extra space for the load •...
GENERAL SAFETY STARTING INSTRUCTIONS Please read the operating instruc- tions carefully before using, main- These safety instructions are meant for the owners of tenance or repairing the machine. FARMI machine, as well as those who operate, service or Observe all operating and safety ATTENTION repair it.
Page 9
TRANSPORT OPERATION Before driving with the machine, ensure the safe Many occupational accidents take mounting of the machine. Make sure that the jour- place in abnormal circumstances. nals are seating correctly and that the pins are tight. Therefore it is important to take into Check the tension of the lower link stabilizers.
Page 10
MAINTENANCE OILS AND LUBRICATION The machine may only be serviced and repaired Always use the oil types recommended by the by professionals. manufacturer. Other types of oil may cause faults or Electrical and hydraulic faults may only be repaired improper operation of the equipment, which could by authorized professionals.
Page 11
13. Avoid prolonged or repeated oil contact with your skin. 14. If sprays or contact with the skin cannot be avoided, use protective gloves, goggles and clothing as necessary. Do not use oily clothing. 15. Avoid discharging hydraulic oil into the environment, as it can pollute waterways and the groundwater.
TECHNICAL DATA 9000 kg Load capacity 1300 kg Dead weight of the trailer 10300 kg Max. permissible total weight of the trailer 40 km / h Max. permissible towing speed 1700 kg Max. permissible vertical load on the drawbar eye 1,9 m 2 Loading area 400/60-15,5...
Page 13
MAIN COMPONENTS Towing eye Draw bar Parking support Frame Screen Bogie bolster Bolster set Stake Tyre 10. Bogie beam 11. Hydraulic steering...
STICKERS AND PLATES The following plates and labels must be correctly attached to the machine. Missing safety plates / labels must be rep- laced immediately.
Page 15
1. Machine plate FT9 (200002495) 2. Note! See manual for operation and maintenance. (41014750) 3. Minimum distance (40146730) 4. Switch off tractor and disconnect hydraulic hoses pri- or to maintenance. (200000033) 5. Sticker FT9 (200002520) 6. Sticker FARMI Smart (200002514)
ASSEMBLY INSTRUCTIONS FOR USE SAFETY SAFETY Read the assembly instructions be- Read the Instructions for use before fore installing the trailer. Careless using the tractor / trailer combination. assembly and non-compliance with Non-compliance with instructions can instructions may cause hazards to cause machine breakage or user ATTENTION ATTENTION...
MOUNTING A TRAILER/CRANE COMBINATION TO A MOUNTING, DISMOUNTING AND TRACTOR PARKING OF TRAILER/CRANE Please ensure that the pulling device locks-on when COMBINATION mounting the trailer to the tractor. Lift the parking support to the driving position. Connect the hydraulic hoses of the hydraulic steering to Please ensure the following before mounting a trailer to a tractor.
DISMOUNTING A TRAILER/CRANE COMBINATION HYDRAULIC STEERING FROM A TRACTOR The trailer is equipped with hydraulic steering. The Please ensure that the ground is level and stable before hydraulic steering is composed of two double-acting dismounting and parking the trailer. hydraulic cylinders and the associated hydraulic hoses. The hydraulic pressure required for the cylinders is Put locking elements front of/behind the trailer’s tires in generated by the tractor’s hydraulic system.
INSTRUCTIONS FOR MOVING THE BOGIE INSTRUCTIONS FOR MOVING THE BOLSTER SET BOLSTER Loosen the four (4) mounting screws of the bolster Loosen the four (4) mounting screws of the bogie set. bolster. Move the bolster set to desired place. Lift up the mounting bracket behind the bogie bolster. Tighten the mounting screws of the bolster set to a Move the bogie bolster to one of the three (3) torque of 400 Nm.
WORKING INSTRUCTIONS • Make sure there are no people in the working area. • Take care that you can see the whole working area without difficulty. • Never use the trailer to transport people. • Be especially careful when working near electric li- nes.
Page 22
Tie up the load always when driving on road. ATTENTION Mounting lug of the cargo load, 4 pieces When working in the proximity of live wires, always adhere to the given safety distances (cf. table). WARNING Voltage Minimum distance, m rating, kV Overhead line Pendant...
MAINTENANCE OBJECT ACTION Maintenance interval, working hours 8 h, 50 h, After 250 working hours or after working shift or after working week or once a year Check cylinders and Check pins and lockings Check the condition of General leakages in hoses Check fastening bolts primary structures Lubricate axis of rotation of...
Page 24
MAINTENANCE PRESSURE MEASUREMENT • Maintenance work must be carried out regularly to Always make the adjustments with the manometer in ensure safe and trouble-free operation. place. • Always use the appropriate tools. • Determine the location of the defect. • The main pressure is measured from the measu- •...
CHECKING TIRE PRESSURE REPLACING HYDRAULIC HOSES • Only use appropriate tools for checking and adjus- • When changing hydraulic hoses, clean the new ting tire pressure. hoses, at least with compressed air. • Do not exceed the recommended maximum • Check that the hoses are connected properly after pressure.
Page 45
14084570 BRAKE PARTS FT9/FT10, PP-MODULE Part Order no Description Remarks 24084770 Bogie beam right 24084780 Bogie beam left 54563291 Plain bearing 52401023 Grease fitting 34082650 Fastener right 34082660 Fastener left 34084670 Fastener for rear brake cylinder 52062023 Hex screw ST8.8ZN, M12X30, DIN933...
Page 51
200002744 BRAKE PARTS FT9, HX-MODULE, FRANCE Part Order no Description Remarks 24084650 Bogie beam Right 24084660 Bogie beam Left 54563291 Plain bearing 52401023 Grease fitting 34084360 Brake parts Front brake 25-1 34084370 Brake parts Front brake 25-2 52200052 Washer ST5.8ZN, M12, DIN125...
Page 59
54839930 HUB, WITHOUT BRAKE, 6-BOLTS, RINNER Part Order no Description Remarks 200004824 Grease cup ø90 52115250 Crown nut M36 x 1,5, DIN 937 52200136 Washer 54522347 Tapered roller bearing 32210 200004847 7 FA 3 D180 54522230 Tapered roller bearing 32213 200004825 Seal ring CTM 120 x 65...
200002596 TYRE SET 400/60-15.5 Part Order no Description Remarks 200004647 Forest tyre left 54849047 Tyre 400/60-15.5, 14PR, I328 54847025 Inner tube 400/60-15,5 54844030 13.00X15.5, OFF -15 200004646 Forest tyre right 54849047 Tyre 400/60-15.5, 14PR, I328 54847025 Inner tube 400/60-15,5 54844030 13.00X15.5, OFF -15 200002597 TYRE SET 500/50-17 Part...
Page 63
The warranty does not cover wearing parts. Send faulty parts, carriage paid, to the manufacturer for inspection. Repairs will be conducted by Farmi Forest Oy or an authorized expert. The warranty is valid only if the bottom part of this page is filled in and returned to the manu- facturer within 30 days of receipt of the product.
PRODUCT REGISTRATION FORM Date of delivery:_____/_____ 20_____ Dealer: Dealer’s address: Dealer’s tel: Product and type: Serial number: Return to the manufacturer Date of delivery:_____/_____ 20_____ Dealer: Dealer’s address: Dealer’s tel: Customer: Customer’s address: Customer’s tel: E-mail: Product and type: Serial number:...
Page 65
Farmi Forest representatives: Western Europe Austria Belgium & Luxemburg Esch-Technik Maschinenhandel G.m.b.H. Déom Sa Klagenfurter Str. 129 Rue de Monty, 177 Sankt Veit an der Glan B-6890 Libin A-9300 Austria Tel. +32 (0)61 65 00 20 Tel. +43 4212 29600 contact@deom.be...
Page 66
CH-9554 Tägerschen TG Aydinli Tuzla Istanbul Tel. +41 (0) 71 918 8020 Tel. +90 216 593 09 42 info@adbachmannag.ch mustafa.kemal@rekarma.com adbachmannag.ch rekarma.com.tr Farmi Forest representatives: Eastern Europe Estonia Belarus Melit AP Oü TIGER Ltd Punane 6-311 Kozlova Lane 25-17 13619 Tallinn Minsk 220037 Tel.
Page 67
Farmi Forest representatives: North and South America Argentina Canada Inderfor S.A. MTI Canada Inc. Pasco 1732 - 10º "A" 2000 Rosario 1720 Boulevard Guillaume-Couture SANTA FE Saint-Romuald Lévis QC G6W 0R5 Tel. +54 (0)341 679 25 66 Tel. 418 839-4127 info@inderfor.com...
Need help?
Do you have a question about the FT9 and is the answer not in the manual?
Questions and answers