Table of Contents
Advertisement
9. After clicking on "Detail Setting" (see figure on previous page), you will be prompted to enter the camera's name and
password. Please enter the default password of "1234", and click "OK" to log in to the IP setup page.
The Admin utility allows users to search for and set up the video cameras located on their networks. From the utility,
users can view all of the selected cameras' information. It also provides a Setting Wizard, which easily guides users
through the process of installing network cameras on the network. (This is an alternate method of installing the video
cameras on the network. It is highly recommended that you use the Quick Setup Wizard to install the camera, as
described on page 11.) Please remember that you can only use the Admin utility with other HRNC1 cameras.
There are two ways to run the Admin utility:
1. Click "Start", and then select "Programs\HomeRemoteVideoCamera\Admin Utility" to run the utility.
2. On your desktop, click on the "HomeRemote Admin" icon
to run the utility.
Once you have initialized the utility, it will search for all of the HRNC1 cameras available on your network. To configure
more detailed settings, please refer to the descriptions in the sections that follow.
15
Advertisement
Table of Contents
