Switching Bass And Treble Boost On/Off; Connecting Headphones - Silvercrest SLB 1.2 C2 Operating Instructions Manual

Switching bass and treble boost on/off

♦ Turn the BASS switch
switch the loudspeaker
♦ Turn the BASS switch
switch the loudspeaker
♦ Turn the TREBLE switch
switch the loudspeaker
♦ Turn the TREBLE switch
switch the loudspeaker

Connecting headphones

DANGER
►
♦ Ensure that the rotary switch
♦ Insert the 3 .5 mm jack plug of the headphones into the head-
phone socket
♦ Before placing the headphones on your head, switch the loud-
speaker
NOTE
► As soon as you connect the headphones, the loudspeakers
will be muted .
► The headphone output is passive, which means that the volume
can be controlled using the rotary switch
volume is specified by the computer or audio device . Please
note that headphones may only be connected if the audio device
has the necessary standard volume limitation applied to its
output . Please refer to your audio device instruction manual for
more information .
■ 8 │
GB
3
3
2
2
Loud music can lead to hearing damage .
Avoid extremely loud sound levels, especially over
long periods of time, when you are using head-
phones .
.
5
on again and carefully increase the volume .
6
to the "ON" position in order to
bass boost on .
6
to the "OFF" position in order to
bass boost off .
6
to the "ON" position in order to
treble boost on .
6
to the "OFF" position in order to
treble boost off .
6
is in the OFF position .
4
, but the maximum
4
SLB 1.2 C2
6