Advertisement
M183
I.V. Trainer with Indicator
User's Manual
(131025)
)
－ＩＮＤＥＸ－
● Introduction/Table of Contents
● Purpose/Content
● Cautions on Use
● Instructions for Use
● Storage Instructions
Confirm the main unit and accessories directly after the
！
product arrives. If there is any defect or breakage,
Note
inform the dealer or Sakamoto Model.
- 0 -
1
2
3
4
5
Advertisement
Table of Contents
Related Manuals for Sakamoto Model M183
Summary of Contents for Sakamoto Model M183
- Page 1 ● Cautions on Use ● Instructions for Use ● Storage Instructions Confirm the main unit and accessories directly after the ！ product arrives. If there is any defect or breakage, Note inform the dealer or Sakamoto Model. - 0 -...
- Page 2 Introduction Thank you for purchasing our product, “I.V. Trainer with Indicator.” Read this user’s manual carefully in order to use the product for a long time appropriately. This product is closely checked before factory shipment. However, when this product arrives, open it soon, and check if anything on the main unit and accessories are missing or broken.
- Page 3 Purpose The following training (evaluation) can be performed. 1) Intravenous injection training 2) Blood sampling training Content 1) Simulated skin set - Qty. 1 2) Pump - Qty. 1 3) Attachment belt - Qty. 2 4) Exchangeable blood vessel - Qty. 1 5) AA size alkaline batteries - Qty.
- Page 4 Sakamoto Model. 8) This product is a simulator capable of supporting advanced medical training. However, Sakamoto Model does not guarantee the same results during actual treatment. 9) Please note that the specifications of this product may be changed without prior notice in order to make improvements to the product.
- Page 5 Instructions for Use 1) Take out the training kit, and place it on a table with a non-slick surface for training. 2) Get some water ready. 3) Open the top of the pump and fill it up to the line with water. (Always perform these steps before Step 4.) 4) Connect the cable and the tubes that come out of the skin pieces to the pump.
- Page 6 Storage Instructions 1) Turn the switch off. 2) Close the white clasp. 3) Disconnect the LAN cable and the 2 tubes that are attached to the pump. 4) Discharge the water that is inside the pump. 5) Open the white clasp to discharge the water that is inside the tube.
Need help?
Do you have a question about the M183 and is the answer not in the manual?
Questions and answers