Samsung AM MNEPEH Series Installation Manual page 23

Testing the drainage
After installation, test the drainage. Prepare about 2 liters of water.
1 . Unscrew the screws of pipe cover and remove the cover .
2 . Pour water into the indoor unit as shown in the figure .
• Please refer to the leak test in the installation manual for the
outdoor unit .
NOTE
3 . Confirm that the water flows out through the drain hose .
4 . When the drain pump is installed, operate the unit in cooling mode
and check the pumping operation of the drain pump .
Water supply intake
5 . Check the water drops draining at the end of the drain pipe .
Drain pipe
Drain water drops
6 . Make sure there is no water leak at the drainage .
7 . Reassemble the cover of water supply intake .
❋ The design and shape are subject to change
according to the model .
ENGLISH-23