Table of Contents
Advertisement
Air Pipe Installation
1 . Use hose (provided on site) to connect the adapter at the suction/discharge side .
Please use aluminum-foil paper to seal the connection area of air pipe to avoid gas leak .
• For installation, tilt the suction side of air pipe to avoid water accumulation .
CAUTION
2 . Insulate the air pipe to avoid condensation . (Select the insulation according to Page 16 . )
Gradient
Filter
(1/100~1/50)
• Filter must be installed at the air inlet . Buy filter with a dust collection efficiency of over 50% (standard of weight
method) and install .
CAUTION
• If the sealing material is not tidy or tight, abnormal situation may occur during operation .
Connection method of external load
1 . Damper can be installed if necessary when connecting to the Fresh
duct .
2 . Install damper from outside and the damper will work with the Fresh
duct .
Insulation cover pipe out
(Please insulate with aluminum tape)
Outdoor suction air pipe
Aluminum-foil paper Aluminum-foil paper
ENGLISH-19
1(L)
2(N)
Wiring terminal
L Power
N Power
Damper
Option
(0 . 5 A)
1
2
Advertisement
Table of Contents
