Hyundai KONA Electric Emergency Response Manual page 11

3. Disable direct hazards / safety regulations
3.2 Disabling the System – IG (Ignition) Fuse Removal
1. Open the hood.
2. Remove the motor room fuse box
cover.
3. If necessary, lower the windows,
unlock the doors and open the tail gate
as required, before disconnecting the 12
Volt battery (located in the left side of
motor room). Once the 12 Volt battery is
disconnected, power controls will not
operate.
4. In the event the vehicle is unable
to be disabled using the "Power"
START/STOP Button, using the fuse
puller located in the Motor room fuse
box, pull both the IG1, IG2 Fuse from
the motor room fuse box. If the IG
fuses cannot be located, pull out all
the fuses and relays in the fuse box.
Motor room fuse box
10