Montage en gebruikershandleiding
Assembly and user manual
Bevestig de kabels met schuifspanners aan het voorste oog bovenop de lage staander en
het voorste oog op de hoge staander. Bevestig de kabel zonder schuifspanner aan het
achterste oog van de lage staander en het achterste oog van de hoge staander.
Zorg dat de kabels met schuifspanner onder de kabels zonder schuifspanner lopen.
In order to mount the steel tensioning cables, fix the steel cable with slide adjusters in the
eyelet of the low and high bar facing forward and the steel cable without slide adjusters
in the eyelet of the low and high bar facing backwards. Make sure that the steel cable
without slide adjuster is on top.
Schuif de delen van de schuifspanner van elkaar af om de spanning te kunnen verstellen.
For final adjustment of the apparatus, move the slide adjuster towards the deflection
pulley.
7