Table of Contents
Advertisement
10.1 Overview
This chapter explains how to upload new firmware to your Zyxel Device. You can download new
firmware releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device's
performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your Zyxel Device.
10.2 Firmware
Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the Zyxel Device while firmware upload is in progress.
Figure 18 Maintenance > Firmware Upgrade
The following table describes the labels on this screen. After you see the firmware updating screen, wait
two minutes before logging into the Zyxel Device again.
Table 15 Maintenance > Firmware Upgrade
LABEL
Upgrade Firmware
Current
Firmware
Version
File Path
Upload
Firmware Upgrade
DESCRIPTION
This is the present firmware version.
Click Choose File and navigate to the location of the .bin file you want to upload. Remember
that you must decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
PM7510-R0 User's Guide
C
H A P T E R
30
10
Advertisement
Table of Contents
