SEI FA584800TX Assembly Instruction Manual

Vine wall-mount fireplace

Advertisement

FA584800TX
Vine Wall-Mount Fireplace
For assistance with assembly contact:
Southern Enterprises Inc.
Assembly Instruction
Customer Service 1-800-633-5096
service@seidal.com
www.seidal.com
© Southern Enterprises Inc. All Right Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FA584800TX and is the answer not in the manual?

Questions and answers

Summary of Contents for SEI FA584800TX

  • Page 1 FA584800TX Vine Wall-Mount Fireplace For assistance with assembly contact: Southern Enterprises Inc. Assembly Instruction Customer Service 1-800-633-5096 service@seidal.com www.seidal.com © Southern Enterprises Inc. All Right Reserved.
  • Page 2 FA584800TX Vine Wall-Mount Fireplace Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw.
  • Page 3 FA584800TX Vine Wall-Mount Fireplace Assembly Instructions DANGER PLEASE USE IN WELL VENTILATED AREA The fireplace will have open flames and will generate heat. Make sure to keep all combustible items away from the fireplace when the gel fuel is burning.
  • Page 4 8" 8" Measure the wall and mark the location of the center of each of the three screw mounting holes. See Figure 2. Drill three 3/16" holes Using the level, make sure that all into wall three marks are level on the wall. It’s highly recommended that middle screw is inserted into a wall stud.
  • Page 5 Install the fireplace (1, Figure 4) onto the three mounting screws using the mounting holes (2, Figure 4). The proper and secure mounting of the fireplace is when the top edge of each of the mounting holes is resting securely on the mounting screw (3, Figure 4).
  • Page 6 10. Put adhesive pad (5) onto glass panel as shown, then insert glass into the holder as shown. Figure 6 – Fuel Canister Installed 11. Following the instructions on the gel fuel canister, remove the lid (2, Figure 7) from the gel fuel canister (1, Figure 7), and using a long match, light the fuel in each of the canister.
  • Page 7 DANGER PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE TO BECOME HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED. DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME. BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED FROM EACH OF THE GEL FUEL CANISTERS.
  • Page 8 We'd love to hear from you! Email us photos of our products in your home at and we might feature it on our site or use it to model one of our inspirational photos. “PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY” Parts Replacement Form...

Table of Contents