Advertisement
SOUTHERN
SOUTHERN
SOUTHERN
SOUTHERN ENTERPRISES
RELAX...If you can follow a few easy, step-by-step directions
In order .YOU CAN ASSEMBLE THIS ITEM.
CONSUMER
CONSUMER
CONSUMER
CONSUMER SAFETY
PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING
THIS APPLIANCE
WARNING!!!
WARNING!!!
WARNING!!!
WARNING!!!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN
ELECTRIC
DAMAGE,PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.
Thank you very much for purchasing our electric firebox insert. Please read
this instruction carefully before connecting your device to an electrical source.
In order to avoid damage due to incorrect use, please pay particular attention
to the safety information. If you pass the device on to a third party users, this
instruction must also be handed over
Safety Feature :
A thermal overload protector is build in to the heater to prevent overheating.
When an overheat temperature is reached, the heater will automatically shut
off. It can only resume operation when the unit reset (See the instructions
below)
To Reset Heater:
Unplug the heater and wait about 10 minutes for the unit to cool down.
After about 10 minutes, plug the heater in again and follow the Operations
Instructions described in the beginning of this manual.
ENTERPRISES
ENTERPRISES
ENTERPRISES INC.
ELECTRIC
ELECTRIC
ELECTRIC
ELECTRIC FIREBOX
USER
USER' ' ' ' S S S S OPERATING
USER
OPERATING
OPERATING
USER
OPERATING MANUAL
SAFETY
SAFETY
SAFETY INFORMATION
SHOCK
OR
INC.
INC.
INC.
FIREBOX
FIREBOX
FIREBOX INSERT
INFORMATION
INFORMATION
INFORMATION
FIRE
MAY
STYLE NO.:FA515500TX
FA515500TX
FA515500TX
FA515500TX
INSERT
INSERT
INSERT
MANUAL
MANUAL
MANUAL
RESULT
IN
PROPERTY
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SEI FA515500
Summary of Contents for SEI FA515500
- Page 1 STYLE NO.:FA515500TX FA515500TX FA515500TX FA515500TX SOUTHERN SOUTHERN ENTERPRISES ENTERPRISES INC. INC. SOUTHERN SOUTHERN ENTERPRISES ENTERPRISES INC. INC. RELAX…If you can follow a few easy, step-by-step directions In order .YOU CAN ASSEMBLE THIS ITEM. ELECTRIC ELECTRIC FIREBOX FIREBOX INSERT INSERT ELECTRIC ELECTRIC FIREBOX FIREBOX INSERT INSERT...
-
Page 2: Important Instructions
IMPORTANT IMPORTANT INSTRUCTIONS INSTRUCTIONS IMPORTANT IMPORTANT INSTRUCTIONS INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2. -
Page 3: Safety Information
SAFETY SAFETY INFORMATION INFORMATION SAFETY SAFETY INFORMATION INFORMATION Before connecting the appliance to the electrical source, check that the current and power match those given on the rating plate. 2. 2. 2. 2. Do not put the appliance or the plug in water or any other liquid. However, should the appliance accidentally fall into water, unplug the appliance immediately and have it checked by a qualified person before using it again. - Page 4 14. The appliance must not be used if the glass is damaged. 15. This heater is for use on 120 volts electrical outlet. The cord has a plug as shown in figure A. An adapter as shown as in figure C is available for connecting three-blade grounding-type plugs to two-slot receptacles.
-
Page 5: Installation Instructions
HELPFUL HELPFUL ADVICE ADVICE BEFORE BEFORE FITTING FITTING HELPFUL HELPFUL ADVICE ADVICE BEFORE BEFORE FITTING FITTING 1. These instructions are provided in an easy to follow style. Simply follow the instructions in sequence to fit this product. 2. Please retain all packaging until you have checked and counted all the parts and the contents of the fixing pack against the parts list. -
Page 6: Electrical Connection
POSITIONING/LOCATING POSITIONING/LOCATING YOUR YOUR POSITIONING/LOCATING POSITIONING/LOCATING YOUR YOUR CHARMGLOW CHARMGLOW ELECTRIC ELECTRIC FIREPLACE FIREPLACE CHARMGLOW CHARMGLOW ELECTRIC ELECTRIC FIREPLACE FIREPLACE When choosing a location for your new fireplace, ensure that the general instructions are properly followed. For best result, install the fireplace out of direct sunlight. ATTENTION ATTENTION ATTENTION... -
Page 7: Operating Instructions
OPERATING OPERATING INSTRUCTIONS INSTRUCTIONS OPERATING OPERATING INSTRUCTIONS INSTRUCTIONS CONTROL PANEL OPERATING PROCEDURES CONTROL CONTROL CONTROL PANEL PANEL PANEL OPERATING OPERATING OPERATING PROCEDURES PROCEDURES PROCEDURES Control panel on the front unit Thermostat Instructions (LOW, MED & HIGH) Allow the Heater to warm up the room before setting the thermostat. When the desired temperature is reached, lower the thermostat until the unit shuts off. - Page 9 MATENANCE 1 CLEANING YOUR FIREPLACE 2 CLEANING THE FRONT GLASS...
-
Page 10: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING... - Page 12 C C C C ONSERVATION ONSERVATION TERMS ONSERVATION ONSERVATION TERMS TERMS TERMS Keep the electric firebox insert in the dry environment between -25℃ and 40℃. For the best effect, place the electric firebox insert is out of direct sunlight, rain, etc. PARTS PARTS REPLACEMENT...
Need help?
Do you have a question about the FA515500 and is the answer not in the manual?
Questions and answers
Heater turns on and immediately shuts off.... Howdo I correct the problem?
To fix the issue of the SEI FA515500 heater turning on and immediately shutting off, follow these steps:
1. Unplug the Heater: Disconnect the heater from the electrical outlet.
2. Allow the Heater to Cool Down: Wait approximately 10 minutes for the unit to cool down completely.
3. Reset the Heater: After cooling, plug the heater back into the electrical outlet.
4. Follow the Operating Instructions: Use the heater according to the operational guidelines provided in the manual.
This issue may occur if the thermal overload protector is triggered due to overheating. Ensure proper use and avoid conditions that might cause overheating.
This answer is automatically generated
My fireplace flame isn’t working
The flame on the SEI FA515500 fireplace may not be working due to the following possible issues:
1. Electrical Connection – Ensure the unit is properly plugged into a 120V, 60Hz outlet and that the circuit breaker or fuse has not tripped.
2. Thermal Overload Protection – The built-in thermal overload protector may have triggered due to overheating. If so, unplug the unit, wait about 10 minutes for it to cool, then plug it back in and restart.
3. LED Lighting Issue – The flame effect is powered by LED lights. If these lights fail, the flame may not appear.
4. Control Settings – Verify that the flame effect is turned on using the control settings as described in the manual.
If these steps do not resolve the issue, further troubleshooting or professional assistance may be required.
This answer is automatically generated
I need a remote, the board inside the remote broke
I'd like to order a replacement fireplace insert. Where is the best place to purchase one?