Pairing And Connecting To Wearable Devices - Huawei WATCH D User Manual

Wake the screen
Press the Up button.
•
Raise or rotate your wrist inwards.
•
Swipe down on the home screen to open the shortcut menu. Enable Show Time for the
•
screen to stay on for five minutes.
HarmonyOS/Android users can enable or disable Show Time on the Device settings
•
screen of the Huawei Health app.
iOS users can enable or disable Show Time on the device details screen of the Huawei
•
Health app.
Turn off the screen
Lower or rotate your wrist outwards, or use your palm to cover the watch face screen.
•
Perform no operations for a period of time after you wake the screen by pressing the
•
button or raising your wrist.
Press the Up button to access the app list screen and go to Settings > Display >
Advanced to adjust the duration it takes for the watch screen to turn off.
You cannot turn off the screen by covering the standby watch face screen with your
palm.

Pairing and connecting to wearable devices

Before using the device, pair it with your phone. Ensure that your phone meets all the
following requirements:
Your phone must run HarmonyOS 2, Android 6.0, iOS 9.0, or later. (Some devices must be
•
paired with iOS 12.)
The phone runs the latest version of the Huawei Health app. For details on how to
•
download and install the app, see
Bluetooth and location services are enabled on your phone, and the Huawei Health app is
•
authorised to access your phone's location.
Installing the Huawei Health app
Before pairing your phone with your device, download and install the Huawei Health app on
your phone. If you have already installed the app on your phone, update it to its latest
version.
Huawei phones
•
The Huawei Health app is installed on your phone by default. If you are unable to find this
app on your phone, you can download and install it from AppGallery.
Non-Huawei Android phones
•
Installing the Huawei Health
Getting Started
app.
2