Care For Health; Measuring Spo2; Automatic Spo2 Measurements; Sleep Monitoring - Huawei WATCH D User Manual

Care for health

Measuring SpO2

To ensure the accuracy of the SpO2 measurement, wear the watch properly and ensure
•
the strap is fastened. Ensure that the monitoring module is in direct contact with your
skin without any obstructions.
Single SpO2 measurement
1
Wear your watch correctly and keep your arm still.
2
From the home screen, press the Up button, swipe on the screen, and touch SpO2.
3
For some products, touch Measure. The actual product prevails.
4
Keep your body still during the SpO2 measurement.
The measurement will be interrupted if you swipe right on the watch screen, start a
•
workout with the Health app, or receive a notification for an incoming call or alarm.
Data provided is for reference only and not for medical use. Consult a doctor as soon
•
as possible if you feel uncomfortable.
During the SpO2 measurement, the watch will also measure your heart rate.
•
This measurement may also be affected by some external factors such as low blood
•
perfusion, tattoos, a lot of hair on your arm, a dark complexion, lowering or moving
your arm, or low ambient temperatures.

Automatic SpO2 measurements

1
Open the Huawei Heath app, touch Devices and then your device name, touch Health
monitoring, and enable Automatic SpO2 measurement. The device will then
automatically measure and record your SpO2 when it detects that you are still.
2
Touch Low SpO2 alert to set the lower limit of your SpO2 for you to receive an alert
when you are not asleep.

Sleep monitoring

Recording sleep data on your wearable device
Ensure that you are wearing your device correctly. The device will automatically record
the duration of your sleep, and identify whether you are in a deep sleep, a light sleep, or
awake.
17