Handlebar Switches - Yamaha MT07K Owner's Manual

Instrument and control functions
This model is equipped with a self-di-
agnosis function for various electrical
circuits. If a problem is detected in any
of those circuits, the engine trouble
warning light will come on and the dis-
play changes to self-diagnosis mode. If
the display indicates any error codes,
note the code number and have a
4
Yamaha dealer check the vehicle.
NOTICE
If the display indicates an error co-
de, the vehicle should be checked as
soon as possible in order to avoid
engine damage.
Brightness control mode
1
1. Brightness level display
The brightness control mode allows
you to adjust the brightness level of the
multi-function meter unit.
To adjust the brightness
1. Turn the key to "OFF".
2. Push and hold the left set button.
3. Turn the key to "ON" and continue
pushing the left set button until the
display switches to the brightness
ECA11591
control mode.
4. Push the right set button to set the
brightness level.
5. Push the left set button to confirm
the selected brightness level and
exit the brightness control mode.
4-10

Handlebar switches

Left
1
2
3
4
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
Right
1. Start/Engine stop switch "
2. Hazard switch " "
EAU1234M
1
2
/ / "