Panasonic PVQ-1312W Service Manual page 33

2. Confirmation/Alignment of Intermediate Gear B, Main Cam Gear,
and Intermediate Gear A
A. Confirm that the Hole A on Lift Gear is a Through Hole with a
hole on chassis.
B. Confirm that the hole on Intermediate Gear A is aligned with the
hole on Lift Gear.
C. Install the Intermediate Gear B so that the hole on the
Intermediate Gear B is aligned with the hole on the Main Cam
Gear.
3. Holes on Main Cam Gear
A. The EJECT mode Hole on Main Cam Gear should be a Through
Fig. J3-3
Fig. J3-4
33