User Information; Electrical Safety - Kettler Axos Sprinter 2.0 Assembly Instructions Manual

IMPORTANT INFORMATION
Important! Please read these instructions carefully before installation and first use. You will
receive important information for your safety as well as for the use and maintenance of the
appliance. Keep these instructions somewhere safe for information purposes or for maintenance
work or ordering replacement parts. Pass these instructions on with the appliance if the owner of
the appliance changes.
⚠
This symbol indicates an important warning.
These instructions can also be downloaded at www.kettler.net.

1.0 USER INFORMATION

• Caution! Please ensure you observe the instructions in the booklets "Safety Instructions and Instruc-
tions for Initial Operation and Maintenance"
chanics" 3 .
• This symbol
• This symbol
• This symbol
• This sport appliance corresponds to DIN EN ISO 20957-1:2014, and ...
• DIN EN ISO 20957-6:2017, Accuracy HB
•

2.0 ELECTRICAL SAFETY

྇ Warning! Danger due to electric current!
Electric power is always a potential source of danger. Always use the appliance with the necessary
caution.
྇ Do not expose the appliance to moisture! Protect it from contact with liquids
• The properly installed electrical socket to connect the appliance must be easily accessible.
• Before connecting the plug of the mains adapter/device with the socket, the mains adapter/appliance
voltage must be compared to the local voltage. If the values do not match, please contact our service
team.
• After switching the appliance off, remove the plug from the power supply again.
• Be very careful in ensuring that the cable does not become trapped or a "tripping hazard".
• Connect the cable with a grounded safety socket. Do not connect via multiple socket strips! When using
an extension cable, this must comply with the VDE guidelines.
྇ Do not use damaged cables again and exchange them immediately. If the mains line is damaged, this
must be replaced by the manufacturer, a member of the service team or another qualified specialist to
avoid danger.
• This symbol indicates that the appliance is protection class I.
• This symbol indicates that the appliance is protection class II.
• This symbol indicates that the appliance is protection class III.
྇ The appliance may only be used with the mains adapter provided.
and „Computer/training instructions, handling, biome-
1
indicates an Allen key.
indicates a torque wrench.
indicates a screwdriver.
07886-250 Sprinter 2.0 |
EN
7