Troubleshooting And Repair - Chicco Advanced Steam Owner's Manual

Sterilizer with dryer
Table of Contents

Advertisement

Filter Replacement
Reemplazo del filtro
Remplacement du filtre
28
Before starting a new sterilization cycle,
press and hold the "FILTER" icon/button
for about 2 seconds until it switches off.
Antes de iniciar un nuevo ciclo de
esterilización, presione y mantenga
presionado el ícono/botón de "FILTRO"
durante 2 segundos aproximadamente
hasta que se apague.
Avant de démarrer un nouveau cycle
de stérilisation, appuyer et maintenir
enfoncée l'icône/la touche « FILTRE »
pendant environ 2 secondes jusqu'à ce
qu'il s'éteigne.
Trouble Shooting and Repair
PROBLEM
POSSIBLE CAUSE
There is no power.
The Sterilizer does not
turn ON.
The ON/OFF switch
(located on the back of the appliance)
is in the "OFF" position.
The cord plug or the cord
connector has not been plugged in
correctly, or they are damaged.
Appliance was submerged in water.
The feeding bottles are
There are scale deposits in the
stained at the end of the
appliance.
sanitation cycle.
High mineral content in tap water.
Excessive scale deposits on heating
Noise – Incomplete cycle.
plate.
The interface switches off
Not enough water on the heating
and three audible beeps are
plate/container.
heard in rapid succession.
The thermal fuse is broken.
Rapid scale build-up.
Use of tap water with high mineral
content, softened or treated water.
SOLUTION
Check that there is power in the
electrical outlet.
Move the switch to ON position.
Check that the plug and connector
have been plugged in correctly, and
that they are in good condition.
Should the product still not work,
contact Customer Service.
Discard unit.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
Use distilled water.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
Place the correct quantity of water
inside the heating plate/container
and restart the cycle.
Contact Customer Service.
Use distilled water.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
29

Advertisement

Table of Contents
loading

Table of Contents