Hatco Glo-Ray GRA-108 Application Information
Infrared foodwarmer
Hide thumbs
Also See for Glo-Ray GRA-108:
- Installation & operating manual (28 pages) ,
- Installation and operating manual (28 pages) ,
- Replacement parts list manual (12 pages)
Advertisement
Quick Links
GLO-RAY
APPLICATION INFORMATION
Hatco Glo-Ray
®
Infrared Foodwarmers are available in a variety of sizes and combinations to fit holding areas
of any length or depth. Some of the installation possibilities are described on this sheet. For more application
information contact your local Representative or the Hatco Corporation
AVAILABLE SIZES
WIDTH:
Aluminum Housing — 18"-12' (457-3,658 mm). Available in 6" (152 mm) increments –
single extrusion. Stainless Steel Housing — 24", 36", 48", 60", 72", and 96" (610, 914, 1219, 1524, 1829,
and 2438 mm) only.
MIN. 18" (457 mm)
DEPTH:
Aluminum — 6" or 9" (152 or 229 mm) or combinations using 3" or 6" (76 or 152 mm)
spacers. Stainless Steel — 6" (15 cm) only.
Incandescent lights are available for aluminum models only and can be ordered on either side of unit. Center
lights recommended for dual warmer mounting. The 60-watt incandescent shatter-resistant bulbs provide
illumination only and feature a special coating that guards against injury and food contamination in the event
of breakage.
®
INFRARED FOODWARMER
(152 mm)
MAX. 144" (3,658 mm)
.
Advertisement
Related Manuals for Hatco Glo-Ray GRA-108
Summary of Contents for Hatco Glo-Ray GRA-108
- Page 1 Infrared Foodwarmers are available in a variety of sizes and combinations to fit holding areas of any length or depth. Some of the installation possibilities are described on this sheet. For more application information contact your local Representative or the Hatco Corporation AVAILABLE SIZES WIDTH: Aluminum Housing —...
- Page 2 HEAT PATTERNS PRE-FOCUSED: The Hatco Glo-Ray to the holding area recommended. Mounting heights vary depending on the type of heating element. Optional slant reflectors are available to direct the heat pattern left or right. Available for both standard and high wattage elements.
-
Page 3: Mounting Arrangements
® Foodwarmers must be mounted no REMOTE CONTROL ENCLOSURES: Hatco Remote Control Enclosures are available for use with Glo-Ray infrared foodwarmers. All models are built in accordance with U.L. standards to include switches, indicator lights, and wiring, and are ready for installation. - Page 4 ® HATCO GLO-RAY INFRARED FOODWARMERS STANDARD WATT MODELS ELECTRICAL RATINGS AND RECOMMENDATIONS SINGLE ELEMENT MODELS MODEL VOLTS GRA-18 GRA-18 GRA-18 GRA-24 GRA-24 GRA-24 GRA-30 GRA-30 GRA-30 GRA-36 GRA-36 GRA-36 GRA-42 GRA-42 GRA-42 GRA-48 GRA-48 GRA-48 GRA-54 GRA-54 GRA-54 GRA-60 GRA-60...
- Page 5 HATCO GLO-RAY ® INFRARED FOODWARMERS HIGH WATT MODELS ELECTRICAL RATINGS AND RECOMMENDATIONS SINGLE ELEMENT MODELS MODEL VOLTS GRAH-18 GRAH-18 GRAH-18 GRAH-24 GRAH-24 GRAH-24 GRAH-30 GRAH-30 GRAH-30 GRAH-36 GRAH-36 GRAH-36 GRAH-42 GRAH-42 GRAH-42 GRAH-48 GRAH-48 GRAH-48 GRAH-54 GRAH-54 GRAH-54 GRAH-60 GRAH-60...
-
Page 6: Installation Details
FOODWARMER APPLICATION WORKSHEET ® GLO-RAY INFRARED SPECIFICATIONS Use diagram to assure proper specification of applicable unit VOLTAGE (for heating elements) ■ ■ ■ ■ 120V 208V ■ ■ ■ ■ 220V 240V WATTAGE ■ ■ ■ ■ Standard High Watt (Consult factory for special wattages) SWITCH(ES) ■... - Page 7 NOTES Form No. GRAB-0804...
- Page 8 Ponte Vedra Beach, FL 904/280-0279 FAX Number: 904/280-0281 St. Petersburg, FL 727/322-1212 FAX Number: 727/322-1313 Printed in U.S.A. August 2004 HATCO SALES REPRESENTATIVES MUNN MARKETING GROUP Territory: OK & TX excluding El Paso Shawnee, OK 412/364-6094 FAX Number FAX Number: 412/364-4532...