Connecting A Copier To The Netware Server; Supported Environments; Setting Up Netware 4.X/ 5.X/ 6 Print Server Mode - Develop NC-5 User Manual

7
7.2.5

Connecting a Copier to the NetWare Server

Supported Environments

The controller supports the system environments described below.
NetWare version
NetWare 4.x
NetWare 5.x/6

Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode

1
Log in with administrator privileges.
2
Start up NWadmin.
3
Select the print service system or category container, and then select
"Print service quick setup" from the Tool menu.
4
Enter settings into the
name, and
name, and then save the settings.
Note
Specify the users who can use the queue, printer options, number
of queues, and password. Refer to the NetWare documentation for
details.
5
Start up Printer Management Utility and log in to the Administrator
mode, select
then use Printer Management Utility to specify the following settings
on the copier. (Refer to "8 Using Printer Management Utility" for
details.)
6
Load MONITOR.NLM using the NetWare server console.
7-10
Protocol
IPX
IPX
TCP/IP
Print server
Volume name boxes, select
NetWare Configuration
Connecting the Computer and Copier
Emulation
NDS / Bindery
NDS / Bindery
name, Printer name,
Other/Unknown
from the "Network" tab, and
Service mode
PServer / NPrinter
PServer / NPrinter
NDPS (lpr)
Print queue
under Type
NC-5