Setting Up The Ipp Print Connection - Develop NC-5 User Manual

Connecting the Computer and Copier

Setting Up the IPP Print Connection

Set up the IPP Print connection. In order to set up IPP printing, you must
start by installing the printer driver. (For details on installing the printer
driver, refer to "PCL PRINTER CONTROLLER" or "GDI PRINTER
CONTROLLER" in the manual provided with the copier.)
1
When using Windows 2000, click [Start] - [Settings] - [Printers] to open
the "Printers" folder.
When using Windows XP, click [Start] - [Control Panel] - [Printers and
Other Hardware] - [See a list of installed printers and fax printers.] to
open the "Printers and Faxes" folder.
2
Start up the Add Printer Wizard, and then click [Next>].
3
Select
4
Select
5
Enter "http://copier IP address/ipp.cgi" in the
❍
(Example) If the copier IP address is 192.168.0.10, enter:
http://192.168.0.10/ipp.cgi
6
Click [Next>]. When a confirmation message appears, click [OK].
7
Follow the instructions that appear on the screen to complete the
installation.
NC-5
Network Printer, and then click [Next>].
Connect to a printer on the internet or on your intranet.
URL box.
7
7-9