Setting Up The Network Connections; Peer-To-Peer Printing; Windows 95 (Osr 2.5)/ Windows 98/ Windows 98 Se/ Windows Me - Develop NC-5 User Manual

7
7.2

Setting Up the Network Connections

7.2.1

Peer-to-Peer Printing

Windows 95 (OSR 2.5)/ Windows 98/ Windows 98 SE/ Windows ME

Important
Before continuing to set up the network settings, check the following:
Check that the computer is set up to use the TCP/IP protocol.
Check that the copier is also set up to use the TCP/IP protocol.
Check that the printer driver has been installed on the computer.
(For details on installing the printer driver, refer to "PCL PRINTER
CONTROLLER" or "GDI PRINTER CONTROLLER" in the manual
provided with the copier.)
1
Click [Start] - [Settings] - [Printers] to open the "Printers" folder.
2
Right-click the icon for the installed printer driver.
3
Click [Properties] to open the Properties dialog box.
4
Click the "Details" tab, and then click [Add Port].
5
Select Other.
6
Select
7
Click [OK].
8
Enter the copier IP address.
9
Click [OK] .
7-2
Peer2Peer from the list of port types.
Connecting the Computer and Copier
NC-5