Maintenance
Gap between the Main Unit and Toilet Bowl
You can remove the main unit to clean
the top of the toilet bowl and the bottom
of the main unit.
Unplug the power plug.
1
Remove the main unit.
2
• Do not pull the unit with undue force
(because the water supply hose and power cord are attached).
Clean the gap.
3
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft
cloth soaked in water so that no detergent remains.
Mount the main unit.
4
Insert the power plug.
5
The POWER LED lights up.
28
Base plate
Base plate
Click
Soft cloth soaked in water
Bolt
Main unit removal button
Align the center.
Push the main unit
until a click sound
is heard.
(Perform monthly)
Toilet paper, etc. (May cause damage.)
If the power is not unplugged, the unit may
malfunction or cause a failure or electric shock.
Pull the main unit toward you
while pressing the button.
CAUTION
Push the main unit fi rmly
onto the base plate until
a click sound is heard.
After mounting, check that the main
unit does not detach even when
pulled.