DeWalt DW0165N User Manual page 17

Measure the width (Figure
5.
• Point the top of the tool at one side of the
target (room or object).
• Position the tool at one end of the target
and point the laser dot across the width.
(Figure shows where to position
N 1
the tool if you are measuring from the
bottom of the tool.)
• Press to display the width
measurement at the top of the screen.
Measure the length (Figure
6.
• Position the tool at one end of the target
and point the laser dot across the length.
(Figure shows where to position
N 2
the tool if you are measuring from the
bottom of the tool.)
• Press to display the length
measurement on the second line of the
screen.
Measure the height (Figure
7.
• Position the tool at one end of the target
and point the laser dot across the height.
(Figure shows where to position
N 3
the tool if you are measuring from the
bottom of the tool).
• Press to display the height
measurement on the third line of the
screen.
View the Volume measurement at the
8.
bottom of the screen (Figure
Adding/Subtracting 2 Volumes
You can measure the volume of room or
object and then add it to, or subtract it from,
the volume of another room or object (Figure
).
O
).
1.
N 1
2.
3.
4.
).
N 2
5.
).
N 3
6.
7.
).
N 4
Point the tool's laser (Figure
a wall or object, and not toward anyone's
eyes.
Press (Figure
on and display the red laser dot.
Make sure the tool position setting
(Figure ) is correct for taking the
C 4
measurement.
Select as the measurement type.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement
Type Menu (Figure
• Press the arrow buttons to select
• Press .
Press to add, or
volumes of two rooms or objects.
Measure the width (Figure
• Position the tool at one end of the room
or object and point the laser dot across
the width. (Figure
O 1
to position the tool if you are measuring
from the bottom of the tool.)
• Press to display the width
measurement at the top of the screen.
Measure the length (Figure
• Position the tool at one end of the room
or object and point the laser dot across
the length. (Figure
to position the tool if you are measuring
from the bottom of the tool.)
• Press to display the length
measurement on the second line of the
screen.
) toward
A 1
) to turn the tool
A 3
.
).
E 3
.
to subtract, the
).
O 1
shows where
).
O 2
shows where
O 2
E
17