Grundig Connect 360 User Manual page 41

AUX MODE
The AUX connector accepts a 3.5 mm
stereo cable (not include in the box).
• Use a 3.5mm stereo cable, connect
your external device to the "Aux in
socket" on your speaker, the speaker will
change to AUX in mode automatically.
• Press the "+" or "-" button to increase
or decrease your desired volume level.
• When maximum or minimum volume
is reached, a prompt tones will sound.
• Disconnect the stereo cable when you
want to exit AUX in mode.
RESET THE DEVICE
In some circumstances the device's
function may hanging and need to reset.
To reset the speaker:
• Use a 0.8 ~ 1 mm stick or similar
object and carefully insert into the
"Reset" hole. The device is reset, and it
will turn off automatically.
• After that, press and hold the " "
button turn on the speaker.
Note:
• The speaker will always connect
your Bluetooth device when you plugin
stereo cable and use AUX in mode. The
Bluetooth playback will only activate
after stereo cable disconnect.
Note:
• Do not reset the device if it is properly
working.
ENGLISH 41