1. Manuals
  2. Brands
  3. BREDABEDS Manuals
  4. Indoor Furnishing
  5. PENTHOUSE
  6. Manual

BREDABEDS PENTHOUSE Manual

Murphy bed w/ right hutch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PENTHOUSE
MURPHY BED
W/ RIGHT HUTCH
Assembly Instructions
3318 West Nelis Drive
Meridian, ID 83646
/
Parts List
/
Troubleshooting
https://bredabeds.com
Web:
Email:
service@bredabeds.com
1-855-466-4781
Telephone:
/
FAQ
/
Tips
/
Warranty
REVISION: B2|3.8
AUGUST 2021
PEN1-HR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PENTHOUSE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BREDABEDS PENTHOUSE

Summary of Contents for BREDABEDS PENTHOUSE

  • Page 1 PENTHOUSE MURPHY BED W/ RIGHT HUTCH Assembly Instructions Parts List Troubleshooting Tips Warranty REVISION: B2|3.8 https://bredabeds.com Web: PEN1-HR 3318 West Nelis Drive Email: service@bredabeds.com AUGUST 2021 1-855-466-4781 Meridian, ID 83646 Telephone:...
  • Page 2 Thank you for purchasing a BredaBed! THANK YOU! Thank you for your Murphy Bed purchase by BredaBeds! When you’re ready to begin assembly, follow these instructions carefully and be sure not to skip any steps. If you have any trouble during the assembly process, feel free to contact us and one of our specialists will be happy to help guide you through the process.

  • Page 3: Table Of Contents

    WARRANTY POLICY BredaBeds warranties all mechanical hardware for a period of ten (10) years, all wood parts on our products for a period of one (1) year to be free of material or workmanship defects and electronics (such as lights) for a period of ninety (90) days. Warranty periods begin from date of purchase.

  • Page 4: Important Safety Information - Read This First

    Important Safety Information - Read This First SAFETY WARNING READ THIS FIRST Murphy Beds utilize a mechanism to counterbalance weight. The extreme tension of the spring mechanism can be hazardous when safety precautions within these instructions are not followed. Pay special attention when you see any of these boxes: ***SAFETY*** STEP # ***ALERT***...

  • Page 5: Assembly Tips

    Assembly Tips ASSEMBLY TIPS TWO PEOPLE ALLOW YOURSELF VIDEO RECOMMENDED SUFFICIENT TIME INSTRUCTIONS We recommend that When you’re ready Scan the QR Code above with a two people assemble to begin assembly, smartphone to view our products. always give yourself our Murphy Bed Throughout these suffi cient time so that...

  • Page 6: Unpacking Your Bredabed & Frequently Asked Questions

    I have damaged parts on my bed, what do I do? As soon as you do fi nd damage, send us an email at service@bredabeds.com with pictures of the damaged areas, part name(s) (found on the part label), provide your order number and any other additional information.

  • Page 7: Troubleshooting

    Troubleshooting TROUBLESHOOTING The bed doors hit the Toe Kick when opened. The steel frame must be 1/2” back from the Mechanism End. See Chapter 4, Step 3. The bed doors do not hit the top shelf and fall inside of the Bed Cabinet. The steel frame must be 1/2”...

  • Page 8: Parts List: Panels, Hardware Packages & Before You Begin

    Parts List: Panels PARTS LIST: PANELS Bed Cabinet Panel List Door(s)* Bed Left Side Right Hutch, Left Side Right Hutch, Right Side Hutch Top Shelf Hutch Mid Shelf Hutch Bottom Shelf Hutch Adjustable Shelf Hutch Toe Kick Hutch Top Nailer Headboard Shelf** Headboard Bed Cabinet Top...
  • Page 9 Parts List: Panels The following parts will depend on your specific hutch configuration. Hutch Full Door or Bottom Door Hutch Top Door Hutch Full Door or Bottom Door Hutch Top Door 3 Drawers And Pull-Out Night Shelf Drawer Front 1 (Qty 1) Drawer Back 1 (Qty 1) Drawer Side 1 (Qty 2) Drawer Front 2 (Qty 2)
  • Page 10 Hardware Packages HARDWARE PACKAGES You will have 3 boxes of hardware, the following images are color-coded for each box: • Orange outline: Hardware can be found inside the small white or brown box. • Grey outline: Hardware can be found inside the long box “Steel Bed Frame”. •...
  • Page 11 Before You Begin Installation tools that are required Cordless Drill or Impact Driver #2 Phillips Screwdriver #2 and #3 Phillips bit Stud Finder Drill Bit Set Socket Set Level 1/2” Wrench or Adjustable wrench Tape Measure Ladder or Step Stool Rubber Mallet Gloves (Optional) UNDERSTANDING CAM FITTINGS...

  • Page 12: Chapter 1: Hardware Insertion And Bed Cabinet Assembly

    Chapter 1: Hardware insertion. Chapter 1: Hardware insertion. REQUIRED TOOLS REQUIRED HARDWARE • Rubber Mallet • Hardware Package #1 (white box) • Cordless Drill with #2 Phillips • Hardware Card #2 (mech. box) • 1/2” Socket • Hardware Package #6 (white box) •...
  • Page 13 Chapter 1: Hardware insertion. Lay “Right Hutch Left Side” and “Right Hutch Right Side” STEP 2 on floor and insert cam screws from hardware package #1 in holes marked with a circle using a cordless drill. FIG. 1B Right Hutch Right Hutch Left Side Right Side...
  • Page 14 STEP 3 Left Side”, insert cam screws from hardware package #1 in holes marked with a circle using a cordless drill. BredaBeds Murphy Beds are FIG. 1C designed for a mattress thickness of Right Hutch 11” or under, however Headboard...
  • Page 15 Chapter 1: Hardware insertion. FIG. 1D Right Hutch STEP 4 Left Side Left Side Attach each mechanism to the face of the side panels as shown in Fig. 1D using qty 5 bolts and qty 4 nylock nuts found in Hardware Card #2.
  • Page 16 Chapter 1: Hardware insertion. There are 9 Spring FIG. 1E locations. Referring to the STEP 5 spring application chart and Fig. 1E-1H, insert springs into the hole numbers noted for the amount of springs you will be using. Position the spring with the open side of the hook green facing down as shown in and hook it...
  • Page 17 Chapter 1: Hardware insertion. Referring to Fig. 1I, lay parts on floor and insert cam screws from hardware package #1 in holes marked with a circle STEP 6 using a cordless drill (see note at the bottom of this page). Insert cam fittings from hardware package #6 in holes marked with a green...

  • Page 18: Chapter 2: Attaching Springs And Mechanism To The Bed

    Chapter 2: Bed Cabinet assembly. Chapter 2: Bed Cabinet assembly. REQUIRED TOOLS: #2 Phillips Screwdriver In the following steps, you’ll assemble the bed on the floor, then tilt the Bed OVERVIEW: Cabinet up. To do this, you’ll need at least 3 extra inches of height clearance. If the height of your room is shorter than this, you’ll have to assemble the Bed Cabinet vertically.
  • Page 19 Chapter 2: Bed Cabinet assembly. Lower “Bed Cabinet Top Nailer” onto “Bed Cabinet Top” as shown in Fig. 2C and tighten cam fitting using a #2 Phillips STEP 3 screwdriver. Note: Make sure cam fittings are facing toward and aligned to this back edge of the “Bed Cabinet Top” as illustrated below.
  • Page 20 Bed Cabinet will attach to. Once assembled, cam fittings on these parts should not be visible. Penthouse Murphy Beds: The “Headboard Shelf” is not shown in above, but will attach to the remaining 4 cam screws near the “Headboard”. From the perspective shown, the cams should face the wall.
  • Page 21 Cam fittings on the Bed Cabinet Top should face down and WILL be • visible from below. If any of these parts are backwards, they must be flipped around. If you have any question, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding.

  • Page 22: Chapter 3: Attaching The Bed Cabinet To The Wall

    Chapter 3: Attaching the Bed Cabinet to the wall. Chapter 3: Attaching the Bed Cabinet to the wall. REQUIRED TOOLS REQUIRED HARDWARE • Cordless Drill and/or Impact Driver • Hardware Package #10 • #2 & #3 Phillips Bit • 3/16” Drill Bit •...
  • Page 23 Chapter 3: Attaching the Bed Cabinet to the wall. FIG. 3A - DRYWALL CUTAWAY SHOWING WALL STUDS STEP 2 Using a stud finder, locate and mark the exact center of each stud (see page 7 if you have 3 or less stud locations) along the “Bed Cabinet Top...
  • Page 24 BredaBeds to receive replacement tape/label. DO NOT attempt to proceed if the Bed Cabinet Top Nailer is damaged or cracked. Contact BredaBeds for a replacement. If you purchased a wired or wireless light kit with your bed, you can follow the directions for installation at this time that came with your kit.
  • Page 25 If your wall backing varies from this, visit: https://breda.us/walls Contact BredaBeds to discuss if you have any questions or concerns. Have you used the screws provided? Do not deviate from using the screws provided without written authorization.

  • Page 26: Chapter 4: Assembling The Bed Face Panel Unit

    Pay special STEP 1 attention to the location of the pre-drilled handle holes. Fig. 4B is color-coded to match the corresponding collection. Penthouse Murphy Beds: The faux-drawers should be positioned closest to the Mechanism End (and Bed Cabinet). FIG. 4A FIG.
  • Page 27 Chapter 4: Assembling the Bed Face Panel unit. For video instructions of this specific chapter, visit: breda.us/frame Lay the metal frame pieces on top of the bed doors with the wider flange facing down towards the bed doors. Use the STEP 2 hardware from hardware package #3 for the following: LEG END CORNERS: Referring to Fig.
  • Page 28 Chapter 4: Assembling the Bed Face Panel unit. For video instructions of this specific chapter, visit: breda.us/frame Position the frame 1/2” from FIG. 4G - OVERHEAD VIEW “Mechanism End” and centered STEP 3 along the left and right sides. Attach frame to doors using Critical Step screws from hardware card #7.
  • Page 29 Review Chapter 4, Step 2, Fig 4C and Fig 4D Is the work area clear of children & pets? If you have any question, contact us (phone: 1-855-466-4781, email: service@ bredabeds.com or live chat: https://bredabeds.com) before proceeding.

  • Page 30: Chapter 5: Attaching The Bed Face Panel To The Bed Cabinet

    Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. REQUIRED TOOLS REQUIRED HARDWARE • 1/2” Socket • Hardware Card #2 • 1/2” Wrench For video instructions of this specific chapter, visit: breda.us/face FIG.
  • Page 31 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this specific chapter, visit: breda.us/face The bolts for Holes #1, #2 and #3 will all attach from the outside of the frame. In other words, the bolt heads will be on the outside of the frame and the nuts will go on the inside of the frame for all three of the holes.
  • Page 32 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this specific chapter, visit: breda.us/face FIG. 5C - LOOKING THROUGH LEFT SIDE FIG. 5D - LOOKING THROUGH LEFT SIDE 1. Referring to Fig. 5C, stand the Bed Face Panel in vertical position between the mechanism arms, lifting until the bolt in STEP 4 Hole #3 drops in the slotted portion of each mechanism arm.

  • Page 33: Chapter 6: Installing The Handles, Leg Support And Mattress

    DO NOT PROCEED PAST THIS POINT WITHOUT FIRST VERIFYING THE FOLLOWING: Have the bolts in Hole #2 been inserted? If you have any question, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding. Chapter 6: Installing the handles, leg support and mattress.
  • Page 34 Chapter 6: Installing the handles, leg support and mattress. • Install the leg connector rod between the legs and secure with Hex head bolts and star washers from Hardware Card #4 and STEP 4 securely tighten Hex bolt with a 7/16” socket. •...

  • Page 35: Chapter 7: Final Adjustment For The Bed Cabinet And Springs

    Bed Cabinet Top Nailer from the wall. Prior to doing this, measure how far and in what direction the bed cabinet needs to shift in order to achieve alignment. If you have any question, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before doing anything.
  • Page 36 Chapter 7: Final adjustment for the Bed Cabinet and springs. To determine the proper tension, the mattress needs to be in place. The face assembly should raise and lower with about STEP 2 10 pounds of pressure and bed legs should rest on the floor without lifting when bed is open.

  • Page 37: Chapter 8: Installing Hutch Options

    Chapter 8: Installing hutch options. Chapter 8: Installing hutch options. REQUIRED TOOLS Follow the steps in this • Rubber Mallet chapter depending on how the • Cordless Drill with #2 Phillips side hutch was configured. • #2 Phillips Screwdriver For video instructions of this chapter, visit: breda.us/hutch-ops Follow steps 1-5 if your side hutch was configured with drawers.
  • Page 38 Chapter 8: Installing hutch options. For video instructions of this chapter, visit: breda.us/hutch-ops Referring to Fig. 8C, insert cam screws from hardware package 3 Drawers And #1 in holes marked with a circle using a cordless drill. Night Shelf STEP 3 Insert white cam fittings from hardware package #19 in holes green marked with a...
  • Page 39 Chapter 8: Installing hutch options. Follow steps 6 and 7 if your side hutch was configured with doors. FIG. 8F Top, Bottom Or Right Hutch Full Doors STEP 6 Right Side 3 3 16 " Attach hinge plates from hardware package #16 as shown in Fig.
  • Page 40 Chapter 8: Installing hutch options. For the Hutch Doors, assembly is identical. Attach door hinge Top, Bottom Or (2 or 3 hinges per door) by aligning the hinge to the bored Full Doors holes and push down. Tighten the top and bottom screws on STEP 7 the hinge by hand with a screwdriver until snug.

  • Page 41: Chapter 9: How To Disassemble The Bed For Moving

    Chapter 9: How to disassemble the bed for moving. Chapter 9: How to disassemble the bed for moving. REQUIRED TOOLS ESTIMATED TIME • Cordless Drill with #2 Phillips 30 Minutes • 1/2 Wrench or Adjustable Pliers Note: This is an average time only, yours may vary.

Table of Contents