English - TP-Link TL-WA901ND Quick Installation Manual

Note: TL-WA901ND is used for demonstration in this installation guide.
Before You Start
Which mode do you need? Please refer to the table to choose a proper mode.
You want to convert your wired (Ethernet) network to a wireless network.
You are in a Wi-Fi dead-zone or a place with weak wireless signal. You
want to have a greater effective range of the wireless signal throughout
your home or office.
You want to link multiple local networks to the same network using
wireless connections where physical wires are inconvenient (when
connecting networks in different office buildings, for example).
You have a wired device with an Ethernet port and no wireless capability,
for example, a Smart TV, Media Player, or game console. You want to
connect it to the Internet wirelessly.
You want your devices connected to different wireless networks and
isolated by VLANs.
Connect the AP Device
1. Connect the AP device according to steps in the diagram.
2. Turn on the power, wait until the Power (
default SSID and Password printed on the product label to join the AP device's Wi-Fi network.
Scenarios
) and Wireless (
Operating Modes
Access Point Mode (Default Mode)
Repeater (Range Extender) Mode
Bridge with AP Mode
Client Mode
Multi-SSID Mode
) LEDs are lit and stable, and use the

English

1