Benelli 502C Owner's Manual page 130

ITEM CHECKS
Rear brake •
•
•
•
•
•
•
Clutch
•
•
•
•
•
Throttle grip
•
•
Control cables
•
•
•
Drive chain
•
•
•
•
Wheels and tires
•
•
•
Brake and shift
•
pedals •
Check operation.
If soft or spongy, have Benelli dealer bleed hydraulic system.
Check brake pads for wear.
Replace if necessary.
Check uid level in reservoir.
If necessary, add speci ed brake uid to speci ed level.
Check hydraulic system for leakage.
Check operation.
Lubricate cable if necessary.
Check lever free play.
Adjust if necessary.
Make sure that operation is smooth.
Check throttle grip free play.
If necessary, have Benelli dealer adjust throttle grip free play and lubricate cable and grip housing.
Make sure that operation is smooth.
Lubricate if necessary.
Check chain slack.
Adjust if necessary.
Check chain condition.
Lubricate if necessary.
Check for damage.
Check tire condition and tread depth.
Check air pressure.
Correct if necessary.
Make sure that operation is smooth.
Lubricate pedal pivoting points if necessary.
For your safety – pre-operation checks
4 - 2
EN
4