Display; Low Blue Light Mode (Select Products Only) - HP 15 Maintenance And Service Manual

Display

Low blue light mode (select products only)

Your computer display is shipped from the factory in low blue light mode for improved eye comfort and
safety. Also, low blue light mode automatically adjusts blue light emissions when you are using the computer
at night or for reading.
WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
Table 2-3 Display components and their descriptions
Component
(1) WLAN antennas* (select
products only)
(2) Internal microphones
(3) Camera light
(4) Camera
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.
To access this guide:
Select the Start button, select HP Help and Support, and then select HP Documentation.
▲
8 Chapter 2 Getting to know your computer
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
Description
Send and receive wireless signals to communicate with wireless local area networks
(WLANs).
Record sound.
On: The camera is in use.
Allows you to video chat, record video, and record still images. Some cameras also allow
a facial recognition logon to Windows, instead of a password logon.
NOTE:
installed on your product.
Camera functions vary depending on the camera hardware and software