Table of Contents
Advertisement
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Mac Tools Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a
vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands.
!
WARNING: Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted load
with a pair of appropriately rated jack stands.
SPECIFICATIONS
Model
Capacity
JB12
12 Ton
JB20
20 Ton
Oil Filler Plug
(not shown)
Carry Handle
Reservoir
Release Valve
Min. Height
Max. Height
9-5/8"
9-7/8"
Saddle
Ram
Figure 1 - JB12 & JB20 Components
Hydraulic
Lifting
18-5/8"
6"
18-7/8"
6"
Extension Screw
Handle Socket
Pivot Points
2
Base Size
Ext. Screw
(L x W)
3"
5-3/8" x 6"
3"
6-3/8" x 5-7/8"
Handle Assembly
Advertisement
Table of Contents
