Table of Contents
Advertisement
CLEANING AND CARE
Disconnect the power cord or leave the door open to deactivate the oven
during cleaning. Disconnect the power cord before replacing filters and lights.
Charcoal filter replacement
Charcoal filter part number
To order parts call 800-599-7569
Charcoal Filter when installed in your microwave oven, is
used for nonvented, recirculated installation. When it is time
to replace the charcoal filter, the FILTER light on display will
turn on.
If your microwave is vented to the outside, then you can turn
off the filter light in the settings.
1 . Disconnect power to the microwave oven at the circuit
breaker panel or by unplugging.
2. Press the Push" position on the cover
"
3.And then open the cover.
4. Remove the charcoal filter by pushing the top of the filter
inwards, then pull it forward out from the unit.
22
FRPAMRAF
.
5. Slide the top of the new charcoal filter into ? ? ? ?
the top area of the filter cavity.
6. Press the bottom of charcoal filter to place it
into the correct position.
7. Press the Push" to close the cover
"
.
Advertisement
Table of Contents
