Front-Panel Information Display - Harman Kardon CDR 20 Owner's Manual

Front-Panel Information Display

Random Indicators
Program Indicators
Level Indicators
Repeat Indicators
Repeat-Status Indicators
Speed Indicators
Copy-Prohibit Indicator
Dubbing Indicator
Sync Indicator
Important Note: Since the CDR 20 is a dual-deck player/recorder, there are two separate sets of indicators for the Random, Program, Repeat Status,
Remain Time, Total Time and Track Time. In addition, there is a separate Information Display, Play/Pause Indicator and CD Indicator for each deck. As the func-
tion of these indicators is identical for both decks, they are described in this manual with a common letter. When the CDR 20 is playing or recording a disc,
any indicators that light on the left side of the display describe to the status of the Play Deck, while those that light on the right side of the display describe
the status of the Record Deck. Depending on the activity of the unit and the settings you select, different indicators may light on the two sides at the same
time.
Random Indicators: These indicators light
when random playback has been programmed
for one of the CD decks. See page 16 for more
information on random play.
Program Indicators: These indicators light
when one of the CD decks is being programmed
for playback options. See page 16 for more
information on programmed play.
Level Indicators: These LEDs display the
input level during an analog recording, the sig-
nal level during digital recording or dubbing and
the output level during playback. See page 21
for more information on record levels.
Repeat Indicator: This indicator lights
when a repeat function is being used. See page
18 for more information on repeat play.
Dual-Play Indicator
Information Displays
Time Indicators
Remaining-Time Indicators
Total-Time Indicators
Track-Time Indicators
R/RW Indicator
Play/Pause Indicators
Sample-Rate Converter
Repeat-Status Indicator: These indicators
display the type of repeat function being used.
See page 18 for more information on repeat sta-
tus.
Speed Indicators: These indicators show
which record speed has been selected for dub
recordings. See page 20 for more information on
record-speed selection.
Copy-Prohibit Indicator: This indicator
lights when a recording is not possible due to
the intervention of the Serial Copy Management
System (SCMS). See page 20 for more informa-
tion on SCMS.
Dubbing Indicator: This indicator lights
when a dub is in progress between the two CD
Decks. See page 20 for more information on CD
dubbing.
CD Indicators
Record Indicator
Finalize Indicator
Erase Indicator
Auto Indicator
Analog Indicator
Digital Indicator
Sync Indicator: This indicator lights when
the unit has been programmed for a CD Sync
recording. See page 21 for more information on
CD Sync recordings.
Dual Play Indicator: The indicator lights
when the unit is playing in the Dual mode,
which allows both CD Decks to act as playback
decks at the same time. See page 17 for more
information on the dual-play mode.
Information Display: This display serves
two functions, showing the time displays for
discs playing, as well as displaying messages
about discs or recordings.
Time Indicator: This indicator lights in con-
junction with one of the time indicators
to show which of the time status
modes is active.
FRONT-PANEL INFORMATION DISPLAY 7