Harman Kardon SIGNATURE 2.0 Service Manual page 22

Signature 2.0 Processor/Tuner
At the Advanced Settings menu (Figure
OSD-10), press the
¤
twice until SYSTEM RESET
Press the › Menu Control button i again.
This will bring up the System Reset Menu
(Figure OSD-40). If you wish to exit at this point, press
the Menu button j. To proceed with the reset, press the
Menu Control button i to move the highlighted
¤
area to the Yes
› Menu Control button i.
S y s t e m
N O !
Y e s
! ! !
A L L S E T T I N G S
A R E
The next screen (Figure OSD-41) instructs you to proceed
by pressing and HOLDING the Store button
the reset is complete.
P r e s s
t o a c c o m p l i s h
Menu Control button i
> is highlighted.
> line, and then press the
R e s e t M e n u
W A R N I N G ! ! !
W I L L B E
L O S T ! !
Y O U S U R E ?
Figure OSD-40
a n d h o l d S T O R E
R E S E T
Figure OSD-41
Signature 2.0
Follow that instruction by holding the Store button
until the Reset Completed message appears
briefly on screen (Figure OSD-42) and the front panel
Information Display. This is your indication that the
reset has been accomplished, and you may release the
Store button. The system will automatically return to
the Advanced Settings menu.
R e s e t
>
After a reset the system is returned to the original factory
default settings as shown in Appendix A, and the micro-
processor system is re-initialized. Press the Menu button
j twice to return to normal operation, but remember
that you will have to re-enter any settings previously estab-
until
lished that differ from the factory presets.
If a reset does not solve the system problem, consult an
authorized Harman Kardon service depot.
55
22
harman/kardon
C o m p l e t e d
Figure OSD-42