Connecting The Attachments - THERAGUN Elite Getting Started

Using the Theragun Elite
1. To turn on the Theragun Elite, firmly press and
hold the center button on the button pad.
2. Press the plus (+) and minus (-) buttons on the
button pad to increase or decrease speed.
3. Press the left (<) and right (>) arrows on the
button pad to toggle between your Theragun
Elite's pre-loaded treatment presets.
4. To turn off the Theragun Elite, firmly press and
hold the center button on the button pad until
the device shuts down.

Connecting the attachments

Align the attachment with the tip of the rotating
arm and push to connect. To remove, grip the
attachment, placing 1 finger on each side of the
plastic connector. Pull off the attachment.
Correct
EN
Incorrect