Ger Detect FRESH RESULT 2 SYSTEMS PLUS User Manual page 14

➢ This scanning process will takes a
maximum of 3 minutes, Since the
device is searching among the 4
probes in 6 different way to collect all
information required to determine the
depth and the water type and all the
necessary information
➢ After the device finish the search it
will take a few seconds to possess
the gathered information and display
it on the screen as we will see in the
end of search.
➢ When the search process end the
device will display the results as you
see in the following photo:
➢ In the event of water under all probes
you will see report on the device will
appear from which you can learn the
where about of water And the type of
water.
"Note"
When the water percentage is less than 50% that means small amount
of water, and when the percentage is between 50-70% is a good
amount of water, and when the percentage is between 80-100% that
means the water amount be huge