Recommended Tools - Alcatel-Lucent 9500 MPR Installation Practices

Hide thumbs Also See for 9500 MPR:

Chart-1

Charts

Unpack and Inspect Equipment

PURPOSE

This chart provides instructions to unpack and inspect the 9500 MPR radio and to report any

shipping damage or missing parts.

GENERAL

The 9500 MPR radio may be shipped from the factory as an assembled rack assembly or as kits for

field installation.

Alcatel-Lucent provides expert Installation Services for installations that have different

requirements from the recommended configuration as outlined in this manual. Contact the

Alcatel-Lucent Technical Support Center at 1-(888) 252-2832 for details.

RECOMMENDED TOOLS

•

Tin snips

•

Box cutter

STEP

PROCEDURE

DANGER: Possibility of personal injury. The 9500 MPR radio requires two people to

unpack a factory assembled rack assembly from the box. To prevent equipment

damage or personal injury, make sure appropriate help or suitable lifting equipment

is available if needed.

WARNING: Possibility of equipment damage. If product must be transported

or reshipped, repack equipment with approved shipping materials.

Repacking equipment improperly or using unapproved shipping materials

may result in equipment damage, which is sender's responsibility. If any

shipping materials are lost, contact Alcatel-Lucent before transporting or

reshipping product.

Remove external packing slip from shipping container.

Before unpacking container, ensure there is no visible damage to outside of container.

If damage is visible, report damage to freight carrier before opening container. Freight

carrier will advise as to next step to take. (If a camera is available, take several

pictures of damage.)

Use tin snips to cut container strapping.

Unpack and Inspect Equipment

3EM23953AB

Issue 01, February 2010

1-1