Security - MSI MAG B365M MORTAR Quick Start Manual

f Info Block effect [Unlock]
Sets the state of Help information block.
[Unlock]
[Lock]
f POST Beep [Disabled]
Enables or disables the beep sound during system POST.
f AUTO CLR_CMOS [Disabled]
Enables or disables to resume the BIOS automatically when the system fail to boot up.
f Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 10 WHQL Support is enabled.
[UEFI]
[LEGACY+UEFI]
f FIXED BOOT ORDER Priorities
Sets device priority for system boot.
f Boot Option Priorities
These items are used to prioritize the installed boot devices.

Security

f Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the
state of this item will show "Installed" .
f User Password
Sets User Password for system security. User has limited rights to change the BIOS
items with user password. This item will be available when administrator password is
set. After setting the user password, the state of this item will show "Installed" .
f Password Check [Setup]
Selects a condition that will request the password.
[Setup]
[Boot]
f Password Clear [Enabled]
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled]
[Disabled]
Downloaded from ManualsNet.com
Sliding effect.
Fix the Help information block on the screen.
Enables UEFI BIOS boot mode support only.
Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
A password will be requested for entering the BIOS Setup.
A password will be requested for booting the system.
The password will be erased after clear CMOS.
The password will always be kept.
search engine
49
BIOS Setup