Molex
Nano-Fit
®
The harness is populated with the wires for the most
common installation. All other wires are included
and can be installed by the user, along with spare
pins.
A special tool is recommended for pin removal
(Molex #63824-4600 CT15), however a .025" round
pin may work.
If pins are removed, the lock tab will need to be bent
back into place if reinstalled in the connector.
Connector is a Molex Nano-Fit , using pin number
#1053002200
Extraction Tool and replacement pins can be
obtained from Digi-Key.
Extraction Tool-
Pins-
CT Series Traction Control
Appendix c
®
WM11927-ND
WM14957CT-ND
www.moretraction.com
Connector
34