Table of Contents
Advertisement
Setup and Configuring
For maximum benefit, a few parameters need to be
adjusted to suit your needs. These include things
such as Sensitivity, Max retard, Correction Spread,
as well as some RPM parameters.
Changes are made using the Menus on the LCD
screen, and the 2 buttons on the unit, Set & Select.
Press Select to scroll through various parameters
and Set to change a value.
Values are incremented in a circular fashion,
meaning they count up to the maximum allowed
then the next press will start over at the minimum
and increase with each press of the Set button.
A short press of the Select button will save the
current setting and go back one screen. A long
press of the Select button, will back out of the
current screen and NOT save the changes.
Pressing the Select button while hold Set, will return
a value to its minimum, this may be useful if you
accidentally pass the value you intended.
11
CT Series Traction Control
Main
Advanced Settings
RPM Settings
Utilities
www.moretraction.com
V
Advertisement
Table of Contents
