Activating Or Deactivating Features - Philips Sonicare Optimal Clean HX6829/76 Manual

Note: If you press the power on/off button after you started the
brushing cycle, the toothbrush pauses. After a pause of 30 seconds,
the SmarTimer resets.

Activating or deactivating features

You can activate or deactivate the following features of your
toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
EasyStart
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button while the handle
remains on the charger.
3 Keep the power on/off button pressed until you hear a single
short beep (after 3 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the EasyStart feature has
been activated. The brush head replacement light and battery
light will also blink green 2 times in unison to confirm activation.
- Triple tone of high-med-low means the EasyStart feature has
been deactivated. The brush head replacement light and battery
light will also blink amber 1 time to confirm deactivation.
Note: To achieve clinical efficacy, EasyStart needs to be deactivated.
Brush head replacement reminder
Note: You can only activate or deactivate the brush head
replacement reminder when a smart brush head is on the handle.
1 Put the handle on the plugged-in charger.
English 19