Table of Contents
Advertisement
the 2 pipes of the bed (Fig. D:8). Make sure that the pipes of the top do not slide out of the bed
pipes.
Attention: You must secure the pipes of the roof/bed with the 2 Allen bolts
provided. At the backside of the base, right below each pipe, a little
hole is situated where you can secure the Allen bolts in the pipes
(Fig. D:S) with the use of a Hex key (not provided) Fig. E.
Disassemble the backside of the shouldertanner by
unscrewing the four screws. Attach the shouldertanner to
the right side of the sunbed (Fig. F:SB) with the already
assembled bolts (you need to take these out first).
Connect the plug of the shouldertanner to the build-in
female plug, which is situated in the right side of the bed.
Connect the audioconnections* and assemble the
backside to the shouldertanner.
Fig. E
SB
Fig. F
7
Advertisement
Table of Contents
