It can also be connected to an unbalanced RCA line level audio source with Maintain symmetry a suitable adapter cable your Genelec dealer can Check that the monitors are placed symmetrically provide. As the 8010A contains amplifiers, no and at equal distance from the listening position.
Page 3
XLR SIGNAL MAINS INPUT MAINS 50 / 60 Hz 30 W 100 - 240 V~ INPUT CONNECTOR 8010A BI-AMPLIFIED MONITORING SYSTEM CONNECTOR MADE IN FINLAND www.genelec.com Figure 3. Control and connector layout on the rear panel of a 8010A. 2 English...
Autostart function Tone controls The signal sensing Autostart function of the 8010A The frequency response of the Genelec 8010A powers it up when playback begins. Automatic can be adjusted to match the acoustic environ- powering down to standby mode happens after the ment by setting the tone control switches on the playback has ended.
, VESA, and Sanus brackets. For a full list of ® available options, please consult Genelec’s acces- This device complies with part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: sories catalogue at www.genelec.com or contact your Genelec dealer.
Page 6
Genelec Oy 8010 (dBr) vs freq (Hz) 10 Jan 13 Figure 4. The curves show the effect of the “Bass Tilt” and “Desk- top” controls on the free field response of the 8010A BASS TILT DESKTOP 70 100 Genelec Oy 8010 (dBr) vs freq (Hz) 10 Jan 13 Figure 5.