Table of Contents
Advertisement
5
4.15 STA1 Message
Display format: [3ABBCCDD].
A: The locking status of the satellite wave 1*1.
B: The satellite wave 1 Bitabi signal error rate (two effective digits of decimal value)*2.
C: The satellite wave 1 Read-Solomon symbol error rate (two-effective digits of decimal value)*3.
D: The satellite wave 1 Read-Solomon non-correction code word (two effective digits of decimal value)*4.
*1: The "-" will be displayed while the system is acquiring the information, "N" if the signal is not locked on, "D"
if only the demodulator is locked, and "T" if both the TDM and demodulator are locked on.
*2: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX". If no signal is received, the display will show "NS."
*3: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX".
*4: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX".
4.16 SAT2 Message
Display format: [4ABBCCDD].
A: The locking status of the satellite wave 2*1.
B: The satellite wave 2 Bitabi signal error rate (two effective digits of decimal value)*2.
C: The satellite wave 2 Read-Solomon symbol error rate (two-effective digits of decimal value)*3.
D: The satellite wave 2 Read-Solomon non-correction code word (two effective digits of decimal value)*4.
*1: The "-" will be displayed while the system is acquiring the information, "N" if the signal is not locked on, "D"
if only the demodulator is locked, and "T" if both the TDM and demodulator are locked on.
*2: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX". If no signal is received, the display will show "NS."
*3: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX".
*4: The two-digit display may show from 0 to 99. If the display information is being acquired, the display will
show "-". For 100, the display will show "XX".
4.17 Tuner Message
Display format: [5AB____].
A: The locking status of the PLL signal (L= locked, U = unlocked).
B: Antenna connection status (D= normal, U = connection failure).
4.18 SSDEC Status1
Display format: [6AAABBCC].
A: The synchronization status of the PC signal (S10 = synchronized, U01 = asynchornous).
B: Overflow count during voice service data input (two effective digits of hexadecimal value).
C: Underflow count during the PCM output (two effective digits of hexadecimal value).
4.19 SSDEC Status2
Display format: [7_AAAAAA].
A: General error information of SSDEC (six effective digits of hexadecimal value).
5
6
GEX-M7027XMZH/XN/UC
6
7
7
8
A
B
C
D
E
F
51
8
Advertisement
Table of Contents
