Pioneer GEX-M7347XMZH/XN/UC Service Manual page 59

1
A
Mode number Mode name
15 CHDN_REL
16 PROG10UP_WAIT
17 PROG10DN_WAIT
18 PROG10UP_REL
19 PROG10DN_REL
1A CATUP_WAIT
1B CATDN_WAIT
1C CATUP_REL
1D CATDN_REL
Display example: If the system is receiving signals, the display will show [M1_1F_10].
B
4.11 MICRO Status2
Display format: [M2_XX_YY].
X: XM operation mode 2 (two effective digits of hexadecimal value).
Y: XM operation mode 3 (two effective digits of hexadecimal value).
_: Spacing character.
XM operation mode 2 table
Mode number Mode name
00 STOP
C
01 START
02 GETSID
04 GETPROGNAME
05 OFF
06
SETUP
07 NEXTPROG
08 SELPROG
0A NEXTCAT
0D NOSID
0E GETID
30 NEXTPROG1
31 NEXTPROG2
D
32 SELPROG1
33 SELPROG2
XM operation mode 2 table
Mode number Mode name
00 STOP
01 PWROFFW
02 STBYWT
03 PWRON
04 PWRONWT
05 STBY
E
06 PREMUTE
07 PREMUTEWT
08 DWLDWT
09 DWLD
0A INIT
0B INIT2
0C INIT3
0D INIT4
0E INIT5
0F INIT6
10 INIT7
F
48
1
2
Description
Releasing the pre-set channel dial down key.
Waiting for the rough channel dial up key to be released.
Waiting for the rough channel dial down key to be released.
Releasing the rough channel dial up key.
Releasing the rough channel dial down key.
Waiting for the category dial up key to be released.
Waiting for the category dial down key to be released.
Releasing the category dial up key.
Releasing the category dial down key.
Description
Completed the API control process.
Starting the API control process.
Acquired SID .
Switching programs.
Turning the operation OFF.
Starting the application.
Switching to the next program.
Selecting a program.
Acquiring the next category.
SID not available.
Acquiring the HWID code.
Performing the first half of transfer process to the next channel.
Performing the second half of transfer process to the next channel.
Selecting a program from NEXTPROG1.
Selecting a program from NEXTPROG2.
Description
Turning off XM circuit completed.
Turning the XM circuit off.
Resetting SSDEC.
Starting the XM circuit.
Waiting for the XM circuit power ON to stabilize.
Starting SSDEC reset.
Starting pre-mute DAC.
Waiting for pre-mute DAC.
Downloading the DSP patch code.
Starting to download the DSP patch code.
Starting the initialization of SSDEC.
Initializing SSDEC (Step 2).
Initializing SSDEC (Step 3).
Initializing SSDEC (Step 4).
Initializing SSDEC (Step 5).
Initializing SSDEC (Step 6).
Initializing SSDEC (Step 7).
GEX-M7027XMZH/XN/UC
2
3
3
4
4