Mounting And Transportation; Preparations For Transportation; Saw Arm Lock Pin; Base And Carry Handles - Delta ShopMaster S26-262LS Instruction Manual

MOUNTING AND TRANSPORTATION

Before moving/transporting your saw it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
• Always turn the power off and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• Always lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• Do not use power On/Off switch handle or power cord to lift your saw.
• Always place the saw onto a stable and level surface with clearance for handling and maneuvering.

PREPARATIONS FOR TRANSPORTATION

SAW ARM LOCK PIN

1. The saw is shipped with the arm secured in the down
position as shown in Figure 3. To release the arm,
push it down, cut the plastic tie and release the lock
pin (A).
2. Lock pin (A) is for storage and transport only. Saw is
not to be locked in down position during cuts.
3. Inspect the tool carefully to make sure no damage
occurred during shipping.
4. Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
BASE WITH CARRY HANDLES
Use the carry handles which are designed into the base
for safe and easy transportation of the saw. Shown in
Fig. 4 (B).
9
A
FIGURE 3
B
FIGURE 4