Applicable Controls - Toshiba RAV-SM182KRTP-UL Installation Manual

11

APPLICABLE CONTROLS

A wired remote controller is necessary for this function. This function cannot be operate with a wireless
remote controller.
It takes some time before the remote control becomes operable when the remote control is used for the
first time.
This is not a malfunction.
<When the power is turned on for the first time after installation>
It takes about 5 minutes before the remote control becomes operable.
Power on
<When the power is turned on from the second time>
It takes about 1 minute before the remote control becomes operable.
Power on
Basic procedure for changing settings
Change the settings while the air conditioner is not working.
(Stop the air conditioner before making settings.)
Set only the CODE No. shown in the following table: Do NOT set any other CODE No.
If a CODE No. not listed is set, it may not be possible to operate the air conditioner or other trouble
with the product may result.
Field setting menu
Field setting menu
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
Item
1. Test mode
2. Register service info
3. Alarm history
4. Monitor function
5. Setting louver position
6. Setting timer operation mode
7. DN setting
29-EN
About
5 minutes
" " flashes
" "
disappears
About
1 minutes
" " flashes " "
disappears
1
Set
Settings for when performing the test operation after installation
Registration of information about the contact number for service, model name and serial
number of the indoor unit and outdoor unit
List of latest 10 alarm data: information of check code, date, time, and unit
Monitoring data of sensor temperature, rotating speed of the compressor or other factor.
Change the louver indication setting to match the indoor unit type.
Set whether or not the operation mode can be selected when setting the schedule timer.
Advanced settings using DN code
Remote control becomes
operable.
Remote control becomes
operable.
CAUTION
Push the [ MENU] button to display the menu
screen.
Push and hold the [
[ ] button at the same time to display the
4
"Field setting menu".
Push and hold the buttons for more than 4 seconds.
Push the [ CANCEL] button to return.
Function
‒ 29 ‒
Installation Manual
MENU] button and the