Cleaning And Storage; Technical Data - Garden Groom Garden Barber Operating Instructions Manual

You can now continue working with the "Garden Barber". However, ensure that no "unsuitable"
plants end up in the cutting head.

Cleaning and Storage

❐ When cleaning the cutting head, do not touch the blades with
your fi ngers and/or do not insert your fi ngers between the blades.
Wear work gloves when doing so!
❐ When cleaning, do not use any scouring or abrasive cleaners.
For easier handling and to ensure that the blades have the longest possible life cycle, you should
clean the cutting head (11) after every use as follows:
1. Remove the collecting hose (2) from the ejection opening.
2. Disassemble the cutting head and remove any cuttings that have accumulated. For this, follow
the instructions in the section "Removing accumulated Cuttings", steps 3 to 5.
3. Clean the cutting head carefully with a damp cloth.
4. Return the cutting head to its previous position (see "Removing accumulated Cuttings", steps
6 and 7).
5. Stow the device and accessories in the collecting bag (1) and store it in a dry place that is not
accessible to children.
Do not place any other objects on the collecting bag with the device.

Technical Data

Modell:
Unit:
Storage battery:
Speed without load:
Sound power level LWA:
Sound power level LPA:
Vibration strength:
Volume of the collecting bag:
Charger
Input voltage:
Output voltage:
Storage battery charging time:
Safety class:
Suitable for a branch diameter of up to 6 mm.
The specifi ed vibration emission value according to EN 60745.
02064_DE-GB-FR-NL_V1.indd 21
6. Put the cutting head back on the main unit. For this, insert the
pin of the main unit in the corresponding opening on the cutting
head (see fi g.) and push both parts together (in the process, turn
it back and forth gently) until the fasters audibly lock into place.
7. Turn the ejection opening with the cutting head counterclock-
wise until it audibly locks into place.
8. Secure the collecting hose on the device.
GG40
Garden Groom Garden Barber
2 x 3.6 V, lithium
4400 rpm
9 dB(A) k: 3 dB(A) 5
79 dB(A) k: 3 dB(A)
4.50m/s k: 1.5m/s
2 2
6 l
220-240V~/50Hz
9V DC, 400mA
approximately 5 hours
II
21
15.02.10 13:50