Instruction Sheet
TOOLS REQUIRED
•
Safety Gloves (cut resistant)
•
Screw Drivers, Phillips & Flat Head
PARTS REQUIRED
QTY
DESCRIPTION
1
Gasket Ice Shaver
,
Ice shaver blade is sharp on both edges. Wear cut resistant gloves
when handling.
Important
Keep refrigeration cabinet door closed so product
remains chilled.
1. Verify operation of unit with manager. Make notes and
take pictures of any issues.
2. Remove ice assist bar and ice bin lid.
3. Scoop out as much ice as possible.
4. Replace ice bin lid.
NOTE: Ice bin lid must be in place to operate ice dispense motor.
5. From touchscreen use MANUAL ICE to empty
remaining ice from ice bin.
A. Place a large cup in the dispense area.
B.
From the drink making screen press ICE & WATER.
PART NUMBER
3434865
CAUTION
645 PARK EAST BLVD SUITE 5, NEW ALBANY, IN 47150
Subject: BIC Ice Shaver Gasket Replacement
SCOPE: MULTIPLEX BIC UNITS MA-8-2, MA-8-2BF, MA-8-2AF
C. Press ICE ONLY.
D. Press LARGE.
E.
Ice will begin dispensing into cup.
F.
Empty cup of ice and repeat process until ice bin
is empty.
6. Power unit OFF using switch located on LEFT side of
unit and unplug.
7. Remove ice bin lid, ice shelf, ice auger nut and ice auger.
Document Number: MPX-i-067 01/26/2022
MULTIPLEX
844-724-CARE
WWW.MULTIPLEXBEVERAGE.COM
Refreshing the Experience
O F F
1 of 2